Although your HJC Helmet is constructed with the best materials available to offer a long-lasting product, it will eventually need to be replaced. Immediately replace your helmet if:

It has suffered an impact. Your helmet is only designed for ONE impact. An impact may fracture the outer shell or compress the impact-absorbing liner. You may not be able to detect this damage. Any impact in a crash or a drop from as low as 4 feet is enough to damage your helmet.

The shell, lining, or retention system is damaged. The helmet shell, the impact-absorbing lining, and the retention system must be in good condition to provide you with the most protection.

Even if your helmet has not been damaged, it needs to be replaced every 3 to 5 years depending on how much you use it. Over time, UV rays and adhesive and component aging will damage your helmet. Wearing a damaged helmet may increase your risk of serious injury or death in an accident.

If you are unsure if you need to replace your helmet, contact HJC Europe before using your helmet again.

To reduce the risk of serious injury or death and to help prevent damage to your helmet:

Never adjust your helmet accessories while riding – Only make helmet adjustments when stopped.

Never drop your helmet – Dropping your helmet may crack the shell or damage the protective foam. The damage may not be visible. Your helmet is only designed for ONE impact. Refer to “Helmet Replacement for more information on what to do after the helmet has been dropped.

Never wear anything between your head and your helmet – This may reduce the effectiveness of your helmet.

Never hang or hook your helmet on anything including mirror stalks, handlebar, or sissy bars – Doing so may cause damage to the helmet protective foam or liner.

Never use insect repellent on or around your helmet – Insect repellant may damage your helmet’s visor, shell, protective foam, or other components.

Never expose helmet to gasoline or gasoline fumes – Gasoline may damage your helmet’s visor, shell, protective foam, or other components.

– If you have any questions on what other substances may damage your helmet, please leave a message on the contact page.

To reduce the risk of serious injury or death and to help prevent damage to your helmet:

Always wear eye protection – If you are not using a helmet with a face shield, always wear eye protection when riding. Always lock your face shield in place when you are riding.

Always be alert for sounds – Your helmet may impair your hearing. However, your helmet is not a form of hearing protection.

Always store your helmet in its helmet bag when not in use to help reduce accidental surface damage.

To reduce the risk of serious injury or death, always use your helmet correctly.

Off-Road Helmet: Check the visor screws – retighten if necessary. Be sure not to over-tighten any screws. Plastic base plate screws can break and aluminum visor screws can strip the screw sleeves if over-tightened.

Full-Face Helmet: Check the shield and shield ratchet – retighten shield ratchet screws if necessary. Be sure not to over-tighten any screws. Plastic base plate screws can break and aluminum screws can strip the screw sleeves if over-tightened.

Check for helmet damage. If your helmet is damaged or cracked, stop using it immediately. See “Helmet Replacement” section for further information. If your helmet has been dropped, you may not be able to see the damage.

Check for worn or damaged parts. Plastic components may wear out over time. If you find worn or damaged parts, replace them or purchase a new helmet.

If you buy a new helmet, destroy the old one to ensure it cannot be reused. Do not sell or give away your old helmet, even if it has not been damaged. Over time the protective foam in the helmet will adjust to the contours of your head. If someone else uses this helmet it will not provide them with as much protection.